LED Product Details: 

LED Optical Specification:

LED Electric Specification: 

Others:

LED lamp Product photos:

LED Spotlight OEM Service

We can provide LED OEM services for you

 Light source:

LED Chip	CREE (USA)	Bridgelux (USA)	Epistar (Taiwan China)	Tekcore (Taiwan China)
Photo
Luminous Flux	100lm-110lm	110lm-120lm	90lm-100lm	110lm-120lm
Light Decay Rate	<1%(5000 Hours)	<1%(3000 Hours)	<1%(3000 Hours)	<1%(2000 Hours)
Input Voltage	3.0V-3.2V	3.2V-3.4V	3.2V-3.4V	3.3V-3.5V
Chip size	45mil	45mil	45mil	45mil
Remark：	Our factory has five high-speed automated production line LED light source, we can quickly meet your LED lamp beads custom requirements, we can manufacture what you need for your lighting products We also supply other LED chip: CREE, Bridgelux, Epistar, Tekcore, Osram, APT , Epileds, Farsun, Hpoled, Forepi, Rainbow LEDs Standard Color Temperature: 1.Warm White: 3700 Kelvin; Yellowish Light 2.Natural White: 4200 Kelvin; Natural White Light 3.Daylight White: 5500 Kelvin; Pure White 4.Cool White: 7000 Kelvin;  Bluish Light

LED Power supply:

Model	LED-P1 Planar Transformer Series	LED-P2 Dimmable Series	LED-P3 High-quality Series	LED-P4 General Series
Photo
Input	100V-110V/220V-240V 50/60Hz	85V-250V 50/60Hz	100V-250V 50/60Hz	100V-110V/220-250V 50/60Hz
Output	300mA ±5%	0mA-350mA	300mA ±3%	300mA ±7%
Size	23 * 17 * 16	52 * 20 * 19	55 * 22.3 * 19.3
Operating Temperature	-10℃ ～ +90℃	-10℃ ～ +80℃	-10℃ ～ +90℃	-10℃ ～ +70℃
Humidity	RH 20%-50%	RH 20%-50%	RH 20%-75%	RH 20%-50%
Storage temperature	-20~+105℃	-20~+105℃	-20~+105℃	-20~+80℃
Net weight	7g	12g	16g	6g
Dimmable	Non-dimmable	Dimmable	Non-dimmable	Non-dimmable
Feature	Planar Transformer, Anti-oxidation, long life, stable quality, high current accuracy.	Free to choose the intensity of light	CE, ROHS, High efficiency, Safe and reliable high-quality	Good quality, Low price, small

LED lamp Base Type:

E27	E26	B22	E14

Other OEM Services:

Features & Benefits:

High Brightness

Our LED Spotlight Tube consists of high quality SMD High-Power LEDs and can emit a higher brightness at much lower cost. Surface Mount LEDs transfer heat better and are a better solution for longevity.

Easy Installation

Our LED Spotlight Light can be easily installed like a conventional Spotlight into the existing sockets. you enjoy more energy savings.

Extended Life

With very little heat output, proper drive characteristics and high quality LEDs, our LED Spotlight has a lifetime of up to 100,000 hours. These are the highest quality tube lights available on the market today - You get what you pay for.
The LED Spotlight is manufactured under ROHS, contains no MERCURY, Emits NO RF interference!!

Humidity/Moisture Resistant

With IP54 degree protection, our LED Spotlight Light can operate normally even in a indoor environment. Can operate in moist environments in 'seal-tight' fixtures.

Energy Saving!

Our LED Spotlight Lights consume power from 1W to 30W. This saves much more energy than conventional bulb. By just retrofitting your existing fixtures, you'll enjoy a 85%+ electrical savings!
The LED Spotlight is completely enclosed. The LEDs are surrounded by a Clear or Frosted acrylic lens and emit light like a conventional T-series fluorescent light. Our LED Spotlight is typically used for lighting in Garages, Basements, Task Lighting, Store Displays, General Warehouse Lighting, RVs, Buses, and Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations and more. It can be used anywhere!

Available in four different color temperature renderings:

Warm White: 3700 Kelvin; Yellowish Light
Natural White: 4200 Kelvin; Natural White Light
Daylight White: 5500 Kelvin; Pure White
Cool White: 7000 Kelvin;  Bluish Light

Other:
No Hum or Buzz
Instant Start; No Flickering
ROI - 18 to 24 months (even quicker with increasing electric rates!)
Patented Power Rectifier - Will not inject RF interference onto the power line. Excellent for X-10 or other power line Home Automation installations!
Patented Aluminum extruded backing heat sink in aluminum
Clear Lens
ETL/UL/CE APPROVED
Limited Manufacturer 3 year Warranty
Aluminum heat sink, High Power LED's, available in Warm White, Natural White, Day White or Cool White, No UV or RF interference, Patented heat sink and optical diffuser, longer life than incandescent & fluorescent . No mercury, no ballast required, wide voltage and constant current design, solid state, high shock & vibration resistant, Mercury free, 50%+ savings in energy consumption, quite, no noise, no flickering, This product is cULus/cETLus Approved. The products are also in accordance with UL, CE and FCC testing standards. Retro-fit kits available for direct replacement of fluorescent fixtures.